Cacophony Forums
Unofficial Mackie User Forums => DL1608/DL806/DL32R/ProDX Mixers => Topic started by: WhiteNoiseROC on September 19, 2016, 09:15:27 PM
-
Output 14 started distorting. Lost all lows. Moved cable to output 12 and re-patched. Sounds ok now.
Next show same thing. Sounded ok to start then distortion set in after about 30 mins.
Any ideas?
-
What the heck is going on with the DL32, inputs failing, outputs going bad.
You're scaring me away from pulling the trigger and going from the 1608 to the 32.
-
I haven't had any inputs or outputs go bad. But I wonder if a cable came loose inside. You might try opening it up and making sure the ribbon cables are properly seated.
-
Hi WN-ROC,
I have close to a hundred gigs on my DL32R and all inputs and outputs are working.
Have you carefully checked all your output cabling?
Thanks and good health, Weogo
-
It's always been output 14 but different cables every time. Definitely internal. I'm tempted to open it up but it is still under warranty. I have a backup but still hate to send the DL out for repair and be without it.
Sounds like it's not a common problem. Guess I'll do a little more snooping.
-
Hi WN-ROC,
Thanks for the further information.
Would appreciate you letting us know how and how fast this gets resolved.
Good health, Weogo
-
Is there a Mackie authorized repair shop in your area ?
Possibly they could do a quick check or expedite the repair so your not without the item.
Even if they need a part, possibly they can order it and call you when it comes in so your not without the DL while they wait
for a part to come from Washington or overseas.
I would not open it myself in fear of voiding the warranty, plus I'm not as savvy as others here on the inner workings of these magic boxes.
-
Had this on my 1608, the fix for me was going back to mf classic and then back to mf4.5, or u can try to force a firmware update