Cacophony Forums

Unofficial Mackie User Forums => DL1608/DL806/DL32R/ProDX Mixers => Topic started by: slystewart on August 26, 2015, 08:35:30 PM

Title: DL32r Flightcase
Post by: slystewart on August 26, 2015, 08:35:30 PM

Just updating from a DL 16 to the 32r and it will be here in the next few days so next thing to look for a flight case ,thought a 5u one to allow for extra bits if needed or maybe a shock mounted type .With the handles have seen a case with lid clearance of 35mm will this be enough to clear the grab handles on the 32r. just ideas any input to help along thanks  Stewart UK

Title: Re: DL32r Flightcase
Post by: MrDOS on August 27, 2015, 04:57:05 AM

I am using an older Anvil that works perfectly -- enough room for a 1U power filter or digital reverb.

Title: Re: DL32r Flightcase
Post by: dpdan on August 28, 2015, 06:07:28 AM

Congrats on your DL32R purchase Sly!

The handles can be removed easily with a screwdriver.

http://www.youtube.com/watch?v=IPqM-jFLkWc

Title: Re: DL32r Flightcase
Post by: JMc on August 29, 2015, 08:48:52 PM

FYI this is the case I already had, and unfortunately, the handles on the DL32R had to be removed in order to fit the cover.  But, it's not the end of the world.  Would have preferred to have left them on, though.
http://www.skbcases.com/music/products/proddetail.php?f=sku_rack_space_units-6-80&id=126&o=&offset=&c=116&s=80