Cacophony Forums

Unofficial Mackie User Forums => DL1608/DL806/DL32R/ProDX Mixers => Topic started by: gordwait on February 18, 2015, 09:23:10 PM

Title: Mix view on the DL32R pages, can I rearrange the faders?
Post by: gordwait on February 18, 2015, 09:23:10 PM

I have my acoustic guitar plugged into one of the 1/4 inch input combo jacks,
which means it's way off to the right of the mix view. I would like it beside my electric guitar fader..

Can I swap faders around?   (if it's an rtfm let me know!)

Title: Re: Mix view on the DL32R pages, can I rearrange the faders?
Post by: Michael Welter on February 18, 2015, 09:39:27 PM

Unfortunately, you can't move faders around. But you can patch the jack to any fader on the mixer. Open the Patch panel, and go to the Input A tab.

Title: Re: Mix view on the DL32R pages, can I rearrange the faders?
Post by: gordwait on February 18, 2015, 09:55:54 PM

That can work.. I'll wait till I have a stable setup, then do the cross wiring thing.. Don't want to get too lost in connection mazes!
;)

Title: Re: Mix view on the DL32R pages, can I rearrange the faders?
Post by: Michael Welter on February 18, 2015, 09:57:23 PM

Another option, of course, would be to create a view group, so only the channels you are using will be shown.