Unofficial Mackie User Forums > DL1608/DL806/DL32R/ProDX Mixers

FAQ: 1/4" Plug Stuck in Combo Jack

(1/3) > >>

nottooloud:
I vaguely remember reading something about some 1/4" plugs wrecking the combo jack. Just happened to me. Has anyone here looked into replacing one?

dpdan:
with a new connector it's a piece o cake provided you have a good soldering pencil, solder wick and good vision.

nottooloud:
Got a part number?

dpdan:

--- Quote from: nottooloud on June 24, 2013, 02:39:12 AM ---Got a part number?

--- End quote ---

No, but Mackie might tell you the Neutrik part number, if they don't let me know and I will open mine and find out.
Dan

WK154:
Replacing the combo jack may be easy but getting to it is no small task. When you get to the analog part and DC converters take pics. Lots of baggies or trays for all the screws you need to remove is essential. Hopefully you  can get at the connector board without tearing the whole thing apart. Lots of cables connecting the digital and analog section. See http://cacophony.aspinock.com/index.php?topic=346.0  Dan you may want to hold off trying to get a part # by dis-assembly. Good luck!

Navigation

[0] Message Index

[#] Next page