Unofficial Mackie User Forums > DL1608/DL806/DL32R/ProDX Mixers
Advice Request for Migrating from DL-1608 to DL32R
JMc:
New question. What's the quickest, easiest way to send all the input signals to the aux buss, without sending anything out through the L-R mains. I've had a request by a sub musician who wants to be able to set his monitor levels in his assigned AUX output, but without putting anything through the mains except for maybe the intermission music. What's the easiest way to do this?
Michael Welter:
You could deselect all channels, except the intermission music channels, from the Main outputs. You would do this in the routing screen of each channel.
It must be a pretty boring show for the audience. ;)
JMc:
--- Quote from: Michael Welter on June 16, 2015, 12:51:15 AM ---You could deselect all channels, except the intermission music channels, from the Main outputs. You would do this in the routing screen of each channel.
--- End quote ---
Ugh, that's too much hassle. Unless there is an easier way than accessing each channel individually, I'm going to tell the guy to just deal with it and adjust his monitors like the rest of us.
Michael Welter:
It would be one channel at a time. But it still wouldn't take more than a minute. Go into the routing screen of channel 1, deselect Main LR, then swipe left to channel 2, and so on.
Topsøe:
Mute the mains while he is setting up his mix
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version