Cacophony Forums
Unofficial Mackie User Forums => DL1608/DL806/DL32R/ProDX Mixers => Topic started by: iwerica on August 17, 2013, 11:04:34 PM
-
hy there. is it possible to copy aux1 setup and paste it on aux2?
-
Unfortunately, no :( - not yet anyways .
-
hy there. is it possible to copy aux1 setup and paste it on aux2?
if all you want to do is duplicate the EQ setting from an aux and use it on another, first click on the EQ section on the Aux 1 master fader... then click "Presets"
then at the top, click on the "Equalizer" tab (not Input tab) and choose "Store Preset" from the "User" section and name it properly. This EQ preset will now be available to use on any aux send master.
You can then click on the Aux send master's EQ section and then click on the Presets tab again and choose the preset you made,,, the same EQ setting of Aux one will now be on Aux 2,,,, or whatever aux you want.
Same can be done with input channels.
Dan
-
Dpdan, if that was all he wanted to do then that's what he would have asked. So RR is correct with his answer.
-
How stupid of me to try to help someone,
Have a great day Mr. Perfect
-
Have a great day Mr. Perfect
No, that's "Cruise Guy" formerly known as "Bummer Man" ;). He's mostly an OK bloke :). The internet tends to makes everyone sound a bit pompous at times :-\ .
-
thank you all for replys. so if i want to have same aux setups i have to see first one,remember it and than manually make second one?
-
thank you all for replys. so if i want to have same aux setups i have to see first one,remember it and than manually make second one?
Yup - sucks, don't it? ;)
-
You could use another iPad or even an iphone to see the levels while you are setting them. This is of course if you have one of those.
-
yes it sucks, but i am not one which always complain... i am very satisfied with board. thank you all
-
A good thing with the master fader app is that in the top it will give you an exact value as to where the fader is. You can write them down and manually type in the fader position. That's not to hard to do.
-
I've done it with screenshots. Typically two screenshots is enough to save the levels on my iPad. But I sure wish there was a way to save the entire output (volumes and all) as an individually loadable preset.