Cacophony Forums
Unofficial Mackie User Forums => DL1608/DL806/DL32R/ProDX Mixers => Topic started by: musicman7722 on November 08, 2017, 05:02:01 PM
-
Well I went from my DL1608 to a Behringer XR18. I just moved onto a DL32r. I have no issues with the XR18 but I missed a few features of the Master fader that I just didn't want to give up.
I have used a DL1608 for 5+ years I am not a newbie to their apps or hardware but I have a question I can't seem to answer with their manual. I did search here too.
The L and R monitor out? How do I control the volume to these?
Thank you
Chris
-
Hi Musicman,
Just to the left of the Shows box, tap on the three boxes and line.
Where it says MONITOR,
the bottom slider is for Monitor volume control.
The slider above it is for controlling the Monitor alignment delay, for instance if you are out at FOH.
Am betting you are going to like the DL32R!
Good health, Weogo
-
Congrats!!! You'll love it!!! I hope :)
you can also assign any mix that you want to those monitor outputs.
-
Thank you both :)