Cacophony Forums
Unofficial Mackie User Forums => DL1608/DL806/DL32R/ProDX Mixers => Topic started by: Mu71rd on January 12, 2019, 10:27:28 AM
-
I have looked high and low for this. I don’t have a ‘preset’ which is a zero all settings (annoyingly) so I’m wondering how I can reset everything to start with a blank desk, for a new show.
Can’t believe it’s this hard. I have looked around and can’t find anything.
Any help would be really well received, as have a gig this afternoon and my current ‘desk’ is a bit of a mess.
Thanks, Richard
-
click on the display in the upper right-hand corner of Master Fader that shows the loaded snapshot....
click on offline shows....
click on "New Show"
name the new show then hit Enter,
Even though you just created a new show, you did not load a new snapshot so the mixer and Master Fader will stay where they are until you load a new snapshot.
So, click on "Default" in the snapshot window then choose recall.
Bamb!
now you have an empty show ready for new snapshots.
-
Oh wow, thank you.
Cannot believe how hard it was to find that information. I have read the cover manual cover to cover, albeit a while ago when I got the mixing desk, but that was not something I remember reading. I am a professional re-recording mixer of over 20 years, so I’m not clueless in this department.
It could have been programmed more simply I suspect!
Thanks anyway, and hopefully other people will find this post to them the same information
-
glad to help,