Unofficial Mackie User Forums > DL1608/DL806/DL32R/ProDX Mixers
I GOT IT <DL32R> TODAY!!!! WOO HOO!!!!
Wynnd:
I didn't know you could re-route the output with the patch panel. Interesting! (Not sure I would ever do that.)
My very first experience with a Mackie CFX-12 was 15 minutes of NOTHING. I finally broke down and started reading the manual. On that mixer all channels have to go to a group and the group goes to the main outs. Quirky but exactly the way it was designed.
WK154:
Wynnd the I/O patch on the 1608 is pretty anemic. You only can send different sources to the two iPad channels.
Topsøe:
@Dean3
Standart L/R out put should be 13-14 , there is a mute on the Main channel (who wants to mute L/R ?)
If the cannel you are using is in a Group/VCA group the Group/VCA fader should be up and unmuted
sam.spoons:
I mute L/R when I'm setting up monitors, though it's just as easy to pull the fader down.
Wynnd:
I mute the L/R anytime I'm turning on phantom power!!!!!!! I really hate that pop. My guitarist has a phantom powered DI for her acoustic sound into the PA. (Which sounds quite nice.)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version