Unofficial Mackie User Forums > DL1608/DL806/DL32R/ProDX Mixers
QSC TouchMix
nottooloud:
I'd like to know what you mean. I've never heard that terminology. Learning is fun.
nottooloud:
Do you just mean you want pre EQ monitors?
RoadRanger:
--- Quote from: nottooloud on January 23, 2014, 03:27:48 AM ---I'd like to know what you mean. I've never heard that terminology. Learning is fun.
--- End quote ---
Well, the DL1608 could originally only tap off the signals for the aux sends from pre and post the L&R channel fader. The last update added a pre-DSP (EQ and dynamics) tap. IMO the right way to do it is to have the signal path laid out as:
Input, Preamp, HPF, Gate, Limiter, EQ, Comp, Channel Fader
with available taps at post limiter, post EQ, post comp (AKA pre-fader) and post fader. Some might want the processing order different and some mixers allow you to specify the order somewhat. Cheaper mixers (like the DL1608) often only allow you to specify the tap point per aux - the better ones allow you to specify the tap points per-channel too. You might want all your vocals pre or post EQ but the keys, bass, and kick post-comp in you monitors for instance.
nottooloud:
Fair enough. Thanks for clarifying.
RoadRanger:
http://www.youtube.com/watch?v=02BgtqrNb_c
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version