Cacophony Forums
Unofficial Mackie User Forums => DL1608/DL806/DL32R/ProDX Mixers => Topic started by: john54724 on May 08, 2016, 09:04:31 PM
-
I have two ipads with identical MF 3.2 program and settings. I just bought another ipad and it will not connect with the 1608 (wired). Tried cycling power with ipad in and out. The other two are seen and show as wired 'connected' moments after inserting to the dock. Any ideas?
Thanks, John.
-
Does it charge while docked? You can always run it wireless while docked in that situation. (Unless you don't have your own WiFi)
-
Yes it charges while docked and the ipad goes 'ding' when it is first inserted. The gear icon goes from black to red. On the other two ipads, it goes to green when the ipad is inserted. Help.
-
What do you see when you open the devices dialog? Could it be an IP issue?
-
When the ipad is running MF3 with the devices page open, and you dock it, the ipad shows up in the 'wired' connection slot, but status remains at 'not connected'
John
-
I have exactly the same problem but with my one and only iPad 4 .. here the link.. plz help!!!!
''''Hi . I have the DL806
plz help me... i was ok with wired sync with iPad 4... just a few days ago stopped wired connection.... i did reset but nothing
It seems that is connect for play..and play .. music at master fader's app channels but not sync.
I did reset the dl806 , again update , reset my tablet .. but nothing..it working only wireless .. i can see the wired profile while i do the connection but not syncing. ''''''
https://l.facebook.com/l.php?u=https%3A%2F%2Fwww.dropbox.com%2Fs%2Fpovdfxsi9yvsxaz%2FIMG_2741.m4v%3Fdl%3D0&h=EAQFU1uzy
-
Maybe stupid question, but did u tap the box when it shows up as wired?
-
Yes and even wiggled the ipad to insure a good connection. When we plugged in a router, this same ipad was able to connect with the 1608.
John
-
Since there hasn't been another solution, I'd suggest a hard reset of the 1608. Simply hold the rest button next to the power jack while starting it up. It will ask for a firmware update from the iPad.
Hope this helps
-
I JUST MAKE IT!!! WIRED CONNECTION...
JUST UPDATE IOS ...9.3.2 !!!