Author Topic: Screw size & threads for underside of DL1608?  (Read 4763 times)

mauijet

  • Youngling
  • **
  • Location:
  • Posts: 21
Screw size & threads for underside of DL1608?
« on: October 25, 2013, 11:34:03 PM »
Anyone know what size screws the brass inserts take, on the bottom of the mixer? I'm going to screw it down onto my rack case shelf. Don't need Mackie's rack mounting kit. The specs aren't listed anywhere, I checked.
Mahalo!

WK154

  • Door #3
  • Master
  • *****
  • Location: Valencia CA
  • Posts: 2643
Re: Screw size & threads for underside of DL1608?
« Reply #1 on: October 26, 2013, 03:54:21 AM »
4-40# at a 6 degree angle length depends on the tray thickness. Blind thread hole.
When in doubt KISS

Wynnd

  • Master
  • *****
  • Location: Denver Co.
  • Posts: 1403
Re: Screw size & threads for underside of DL1608?
« Reply #2 on: October 27, 2013, 01:28:41 AM »
I bought the kit.  Had lock washers on the screws with a warning to only tighten until the lock washers are flat.  So don't get heavy handed.

cwiseman2000

  • Initiate
  • *
  • Location:
  • Posts: 2
Re: Screw size & threads for underside of DL1608?
« Reply #3 on: July 08, 2023, 12:51:50 PM »
I found the 4-40 screws on Amazon.  I don't understand what 6 degree phrase means.