Cacophony Forums

Unofficial Mackie User Forums => DL1608/DL806/DL32R/ProDX Mixers => Topic started by: bscarter on March 12, 2020, 04:00:25 PM

Title: Anyone know what IP/UDP Ports are used by Master Fader?
Post by: bscarter on March 12, 2020, 04:00:25 PM

We have limited sound personel at our church, and so I would like to be able to connect to the mixer remotely during rehearsal and make requested adjustments from home when needed.  For instance, Singer A wants a bit more click in her monitors...  I know latency will be bad, but I just want to see if it works.   :)

Thanks,

Scott C.

Title: Re: Anyone know what IP/UDP Ports are used by Master Fader?
Post by: WK154 on March 16, 2020, 01:00:34 AM

Call Mackie and tell them you problem  :)

Title: Re: Anyone know what IP/UDP Ports are used by Master Fader?
Post by: JohnMHoyt on March 24, 2020, 09:36:29 PM

Quote from: bscarter on March 12, 2020, 04:00:25 PM

We have limited sound personel at our church, and so I would like to be able to connect to the mixer remotely during rehearsal and make requested adjustments from home when needed.  For instance, Singer A wants a bit more click in her monitors...  I know latency will be bad, but I just want to see if it works.   :)

Thanks,

Scott C.

Well that's an interesting idea!  You could just put it in the DMZ and give the world access =)

I'll try to get some time and do a port scan and see what is listening, or use wireshark and see what is being used.
Who knew that being forced to shelter-at-home would keep me so busy!?