Author Topic: Would this work?  (Read 158 times)

Ampli

  • Padawan
  • ***
  • Location:
  • Posts: 107
Would this work?
« on: August 22, 2017, 05:17:06 AM »
Hi all was wondering if this would work
I was thinking of using the headphone out jack to drive a delay stack
Would this give u a delayed signal of exacly the main l/r or would the signal not as good?

RoadRanger

  • SysGod
  • Counselor
  • Master
  • *****
  • Location: NE CT USA
  • Posts: 1741
  • "Wherever you go, There you are"
    • Cacophony Forums
Re: Would this work?
« Reply #1 on: August 22, 2017, 01:42:13 PM »
I use the headphone out on my Behringer XR12 to give me two extra monitor feeds and it works fine - quality is the same as the other outputs.

WK154

  • Door #3
  • Master
  • *****
  • Location: Valencia CA
  • Posts: 1986
Re: Would this work?
« Reply #2 on: August 22, 2017, 05:16:24 PM »
I use the headphone out on my Behringer XR12 to give me two extra monitor feeds and it works fine - quality is the same as the other outputs.
RR AFAIK he has a Dl1608 and the short answer is no. Delays are only available on mains and Aux sends. Since you are looking for additional outputs I don't think you can spare an Aux for delay to solo.
When in doubt KISS

Ampli

  • Padawan
  • ***
  • Location:
  • Posts: 107
Re: Would this work?
« Reply #3 on: August 22, 2017, 06:02:26 PM »
The solo/headphone on the dl1608 has al delay funtion, this why i ask
Now i use a aux output, just wondering if it would be possible
Sometimes i have more subs in middle of stage and was tinking of delaying thes because the rest is standing like 2 or 3 mtr behind these subs

WK154

  • Door #3
  • Master
  • *****
  • Location: Valencia CA
  • Posts: 1986
Re: Would this work?
« Reply #4 on: August 22, 2017, 08:31:09 PM »
OK so they forgot to mention that in the manual and in which case you can use the Headphone out as a dual output but you need a Di box if you go any distance to powered speakers.
When in doubt KISS

Ampli

  • Padawan
  • ***
  • Location:
  • Posts: 107
Re: Would this work?
« Reply #5 on: August 23, 2017, 03:01:20 AM »
Oke thx for the di tip