Author Topic: New DL32r in House, 1 basic ?  (Read 495 times)

musicman7722

  • Knight
  • ****
  • Location: Hamtpon NH, USA 03844
  • Posts: 166
    • Triple Play
New DL32r in House, 1 basic ?
« on: November 08, 2017, 05:02:01 PM »
Well I went from my DL1608 to a Behringer XR18.  I just moved onto a DL32r.  I have no issues with the XR18 but I missed a few features of the Master fader that I just didn't want to give up.

I have used a DL1608 for 5+ years I am not a newbie to their apps or hardware but I have a question I can't seem to answer with their manual.  I did search here too.

The L and R monitor out?  How do I control the volume to these?

Thank you

Chris

Weogo

  • Knight
  • ****
  • Location: Western North Carolina
  • Posts: 136
Re: New DL32r in House, 1 basic ?
« Reply #1 on: November 08, 2017, 08:36:34 PM »
Hi Musicman,

Just to the left of the  Shows  box, tap on the three boxes and line.

Where it says MONITOR,
the bottom slider is for Monitor volume control.
The slider above it is for controlling the Monitor alignment delay, for instance if you are out at FOH.

Am betting you are going to like the DL32R!

Good health,  Weogo

dpdan

  • Dapper Dan
  • Knight
  • ****
  • Location: St. Louis Missouri
  • Posts: 481
    • kurysound.com
Re: New DL32r in House, 1 basic ?
« Reply #2 on: November 08, 2017, 09:36:02 PM »
Congrats!!! You'll love it!!!  I hope :)
you can also assign any mix that you want to those monitor outputs.

musicman7722

  • Knight
  • ****
  • Location: Hamtpon NH, USA 03844
  • Posts: 166
    • Triple Play
Re: New DL32r in House, 1 basic ?
« Reply #3 on: November 23, 2017, 08:43:55 PM »
Thank you both :)