Unofficial Mackie User Forums > DL1608/DL806/DL32R/ProDX Mixers
WTF
gtrdudes:
So I’ve dealt with my DL32 dropping channels and outputs. I finally took it apart to re-seat all the ribbon cables.
1st gig was perfect.
2nd gig a week later the headphone jack doesn’t work.
Aux 2 randomly shoots white noise at full tilt volume.
I’ve heard people say this but have never experienced it.
I used a different aux out to get through the gig.
Recommendations?
dpdan:
get a Yamaha TF Rack, a Yamaha Tio1608-D stage-box, and a Yamaha NY64-D Dante card.
Never look back...
32 inputs, 20 outputs
That is my honest advice...
JohnMHoyt:
--- Quote from: gtrdudes on March 15, 2020, 06:18:41 AM ---So I’ve dealt with my DL32 dropping channels and outputs. I finally took it apart to re-seat all the ribbon cables.
1st gig was perfect.
2nd gig a week later the headphone jack doesn’t work.
Aux 2 randomly shoots white noise at full tilt volume.
I’ve heard people say this but have never experienced it.
I used a different aux out to get through the gig.
Recommendations?
--- End quote ---
I have that same issue with my original DL32R which sits idle most of the time. SUPER frustrating. My newer one doesn't do this. (yet).
Sorry =(
dpdan:
The TF Rack has 16 inputs and 16 outputs on the rear, inputs 17-32 are of course on the front of the Tio1608-D Dante stage box mounted below the TF Rack.
JohnMHoyt:
Hey... You've got a little clipping going on there...
That's a great mixer. I've worked with it, but it just sucks for me. Too many rack spaces and too darned expensive for a small praise group or band.
App felt a little klunky but hopefully they have improved it.
Navigation
[0] Message Index
[#] Next page
Go to full version