Unofficial Mackie User Forums > DL1608/DL806/DL32R/ProDX Mixers
Digital trim coming to DL1608 and DL806
dpdan:
wynnd. I'm with you.
nothing beats real 100 mm faders.
Even though I still do lots of wedding receptions with various bands, the 1608 has proven it's worthiness.
Tradeoffs for sure :)
Kev tyler:
Would lowering playback volume of the MP3 tracks resolve the playback issue.
MP3 gain.exe
For example
Keyboard Magic:
--- Quote from: beno on October 16, 2014, 03:53:07 PM ---Digital trim is applied at the top of the channel so it acts as much like adjusting the mic pre gain as possible. No point in putting it after all the processing, then it's in essentially the same place as the fader.
--- End quote ---
That's certainly a nice addition. It will save a lot of frustration having to run back and forth from the mixer to tweak the pre's, especially when you have to push your way through a mass of parents at a school concert. :eek: :thu:
walterw:
so this "digital trim" on the 1608 is gonna be no different than the gain control on the comp page, right? at least on the outputs, if you bump the gain level up even 1/8" on that green "mountainside" graphic you get a big jump in that output's level. that's currently the "secret place" to get more level from an output.
WK154:
--- Quote from: beno on October 16, 2014, 03:53:07 PM ---Digital trim is applied at the top of the channel so it acts as much like adjusting the mic pre gain as possible. No point in putting it after all the processing, then it's in essentially the same place as the fader.
--- End quote ---
Just a question as to where you put it. Of course when you finish the other half of the DL32R hardware manual and update the DL1608 manual it will all be in there. :)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version