Unofficial Mackie User Forums > DL1608/DL806/DL32R/ProDX Mixers
I GOT IT <DL32R> TODAY!!!! WOO HOO!!!!
jlb:
Backup router is all fine and dandy, I carry 2 extra. Some places wifi does not work due to interference etc.. Who knows? What then? Ya I can always bring my Pro 1 as a backup :lol:
dpdan:
I have never been anywhere where the Apple Express router didn't work great :)
jlb:
Try within 100' of a large communication tower and see what happens. Some hotels I work are so jammed up with signal it's impossible to run a show wirelessly.
Keyboard Magic:
--- Quote from: dpdan on November 28, 2014, 12:53:54 AM ---Hi Rdmitch and Keyboard Magic,
a few reasons for the confusion about the DL32R facing the wrong way in the rack...
It is actually mounted correctly into the front of the rack with the Furman AC light unit.
When I set up sound using the DL32R, it sits on top of an amp rack so I don't have to bend down to the floor to patch inputs and outputs. This puts the front of the 32R facing the same way as the front of the power amplifiers.
I always want to see the front of the DL32R for patching in stage "sub" snakes, mic lines etc.
Keyboard Magic, thank you!
I do not want to use the built-in reverb/s on the Mackie because they sound absolutely horrible to me.
While the built-in reverb is "singing" in a song, the reverb does not actually sound terrible in context, but for acoustic, jazz and classical stuff, the reverb "tail" is heard and is naked all by itself during open passages of music, and at the end of cutoffs. Like any artificial reverb that is used, it has to sound nice. For this reason, I decided to put this inexpensive TC Electronics M-One reverb in the back of the case with the DL32R because it can fit above the skinny part of the 32R.
So, I need the two wireless receivers, but almost never need to actually see or adjust anything on them. Same goes for the TC Electronics effects unit. The Sennheiser wireless receivers and the TC just sits in the back facing the wall. So cool that Mackie made the shape of this thing to not waste a ton of space inside the rack so we can put the router, hard drive and in fact (other gear) and have it all fit inside a four space case. How cool is that?
Thanks for watching my goofy little video. :thu:
keyboard magic,
the sound quality of the reverb in the 32R has NOT been improved over the DL1608.
In fact, there is no difference in the variety of choices between Hall, Plate, Room etc. it is all the same thing just different pictures.
In this regard, Mackie has really dropped the ball compared to so many other digital mixers I have used and heard. Presonus, Allen & Heath, and even Yamaha have acceptable sounding built-in reverbs.
I really hate talking negatively about the DL32R but so far, this is the only thing I can see really wrong with it. I mean, an Allen & Heath Mixwizard has nice sounding reverb. Two of them in fact.
My DL reverb rant is now complete. :-\
Thanks guys!
--- End quote ---
You are welcome. I've never used the reverb on the DL once. Never had the occasion to use it, especially in school gyms . Uggghhhh. The only digital / software verb I ever use is in audio recording/ remastering. I use the verb in Izotope Ozone 5. And it's not too shabby.
It is a shame that with new hardware/software/firmware they couldn't tweak or create new reverbs. I don't know how hard it would be, but it should be possible in that price range. But I think the DL32 overall is gonna be absolutely amazing to use just the same. I've always liked Mackie stuff. :)
musicdan:
I laughed out loud when I saw you running out to the courier truck. I do the same thing every time a parcel shows up but I'm sure I'll be just as excited as you looked when my DL32R arrives!
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version