Unofficial Mackie User Forums > DL1608/DL806/DL32R/ProDX Mixers
New Lightning Dock Kit and iPad Air Tray
(1/1)
Harpman:
Had a question I thought I'd throw out there. I recently purchased an iPad Air 2 to use for my remote DL iPad and use my iPad Air (1) docked. My DL was the old 30-pin connector, so I purchased both the tray and the connector kit. Installed really easy. I do have an issue when the iPad lock is connected that there is a little slop from left to right. If you slide the iPad toward the lock, it disconnects from the DL. I'm going to create a shim (i.e. self adhesive rubber strip) that will attach to the edge of the lock and close the gap a bit. Just wondering if anyone else has this issue?
Wynnd:
Use a piece of sponge cut to size. That's what I've done with guitar pickups and similar.
Harpman:
--- Quote from: Wynnd on March 06, 2015, 05:44:12 AM ---Use a piece of sponge cut to size. That's what I've done with guitar pickups and similar.
--- End quote ---
Thinking of building out using a cut piece of plastic and then add the foam (sponge) on top of it.
Navigation
[0] Message Index
Go to full version