Unofficial Mackie User Forums > DL1608/DL806/DL32R/ProDX Mixers

Master Fader v3.1 Now Available

(1/11) > >>

rmcassady:
https://itunes.apple.com/us/app/mackie-master-fader/id511500747?mt=8

We just released Master Fader v3.1 to the App Store.

Primarily to support the new DL32R Dante Expansion Card, Master Fader v3.1 also has a ton of bug fixes that should please you. Here's a full list of changes. As always, ensure Master Fader is not set to auto update so you can choose the right time for you.

Support for DL Dante Expansion Card
Mute Group masters are now actionable from the overview
Access Limit buttons now show green instead of red. Duh.
The current parameter readout now shows information when making changes to the I/O patch view
Removed decimal from current parameter readout for Pan and Balance
All radio buttons now active on release instead of press

And here’s the minor bugs that are now FIXED. Thanks to all of you for helping us to identify these!

An update to Master Fader v3 from v2.1.1 and below could fail
Crash when Access Limits Input DSP and Input Routing are enabled and then change mixes in the Output Routing Channel View
Crash when switching between a DL32R and DL1608 in a very particular way
Master Fader could be forced offline after an out of range iPad returned into range
When access limited, Masters will still highlight in overview when touched
Aux pan not recalled correctly on power cycle
Access Limiting Mutes incorrectly limited Aux Mutes
QAP would not show all FX muted from Mute Group
Navigating between Matrix, Overview and Masters view could show incorrect views
Navigating between Overview, Subgroup channel, and Mixer view could show incorrect views
Navigating between Overview, VCA channel, and Mixer view could show incorrect views
Linking Unlinking channels will sometimes not be shown on multiple connected iPads
Show note edits sometimes not shown on multiple connected iPads
Output alignment delay wasn’t restored upon 2.1.1 to 3.1 update
Toggling Access Limits was very slow
Switching between devices could cause the view and mute group assignment sources to disappear
Faders could disappear from Matrix Mixer View
Long channel names could intermittently not scroll in the Matrix and Masters View
Masters View could show no channel strips
Still able to access the FX Channel View when FX is Access Limited
Channel view meters could stop functioning when switching between view groups
Mute Group assignments that were changed while a Mute Group is enabled wouldn’t always update the Overview
Linked subgroups would incorrectly show L/R selector in channel routing view
Monitor Delay on QAP only had the ability to manually enter Meter parameter
When Access Limited Sub Groups could still be assigned to a VCA
Access Limiting Mutes incorrectly limited Aux Mutes
Stereo linked Matrix channel strip would incorrectly appear twice in the Masters View
Leaving a Show’s Notes field without updating could cause connected iPads to disconnect
With certain Access Limits enabled, selecting a Sub in the Mix Selector would navigate to the wrong view

ijpengelly:
Downloaded and opened! Fader scale has been changed to white, still not brilliant on the iPad 2, but better than before.

Not sure exactly what that Mute group change is for the DL1608?!

ijpengelly:
Seem to be getting a quite noticeable lag on the Main output fader when viewing the channel faders page. None of the other faders seem to be affected and if you go into a channel and alter the Main, it moves fine! Very odd indeed. Could be interesting if you catch it, as it jumps almost the length of the scale. Anyone else have this issue?

EQ seems to have the same response as before, so that's fine.

rmcassady:

--- Quote from: ijpengelly on April 28, 2015, 06:15:41 PM ---Downloaded and opened! Fader scale has been changed to white, still not brilliant on the iPad 2, but better than before.

Not sure exactly what that Mute group change is for the DL1608?!

--- End quote ---

This allows the ability to affect mute group on/off from the overview screen on any DL mixer. Just a handy place to hit a group mute if you need to.

ijpengelly:
Ahhhh, yes! Found it, super thanks.

Navigation

[0] Message Index

[#] Next page