Hi All,
I've had this mixer (DL1608) for nearly a year now (10 months). Just a couple of weeks ago (prior to the update to 3.0), and has continued through after the update to 3.0.
I use the Aux's (5 of them) for IEM's.
The problem started when Aux 3 could not control his mix. So one by one I went and muted each Aux and found that when I muted Aux 5, his mix was muted. I first thought that his IEM unit was plugged into the wrong Aux so I swapped Aux 3 & 5 with each other (through the tangle of wires in my rack). This seemed to have corrected the issue as now he could control his mix (Aux 3).
Then Aux 5 could not control their mix. So I began troubleshooting that issue. Come to find out that when I mute Aux 3, it also muted Aux 5... Like they were joined.
Bottom line:
With Aux 3 disconnected, Aux 5 has no output.
With Aux 5 disconnected, Aux 3 DOES have output.
With both Aux's connected they both have output but both are being controlled by Aux 3, nothing I do in the Aux 5 changes anything for the Aux 5 output.
Any ideas?
I'm not at my mixer just now so I can test any suggestions until I'm back at the mixer (most likely this weekend). But wanted to see if anyone else has experienced anything like this..
FYI: Until this incident, the mixer has worked flawlessly with all 6 Aux's being used... AND I will be doing some isolation troubleshooting this weekend....
Thanks for any input anyone may have.
