WAIT A MINUTE. Ok nevermind, I looked it up and all that 1U thing does is turn on and off each light. It's a series of 16 on/off buttons programmed to DMX channels. Still has a purpose, but a much less useful one.
I actually have two 8 channel on/off remotely controlled relay packs that use DB9 cables to go between the manual 1U controllers and the relay packs. I have two trees so put one up on each. the controllers just have on/off switches plus a "flash" button for each channel that toggles the state of the relay.
But they have no dimming capacity so I use 50 watt colored PAR30 NSP bulbs:
http://www.greenenergylight.com/parblackcl.htmlThose fit nicely down deep in the cheap PAR38 cans I have and I don't have to mess with gels
.
Anyways even that is just too big a setup to carry around when also doing sound and only comes out to a rare dance party.
I need something that takes up minimal space in my car, costs >$1000, and takes 5 minutes to set up. I did pick up a Chauvet Stage Designer 50 controller for $150 and a single LED PAR64 DMX can to play with. The can is just HUGE
. The controller is large too but I do like theatre style controllers over the typical DJ type.
Anyways one dimmer pack would probably do me for a couple backlights and front/side lights for a minimal setup. Adding a couple of Bill's Zippers mounted vertically on the speaker poles would give me a stoopid amount of DMX channels to play with
.