Don't know if this will work or not...
ENTERTAINMENT SYSTEMS
PIXEL LED WASH LIGHT
THE ZIPPER
User Manual
ONE
Thank you for choosing our products. Please read this manual carefully and keep it in a safe place for future reference.
The ZIPPER light source is super high brightness LED, multi colorful and long life time. Three-band color can dimmed separately.
This product is designed and made strictly according to CE rules, in full accordance with the standard of DMX 512 Agreement. It is suited for large events, theater, show, DJ, retail, club and hotel applications.
Safety Instructions
Pay special attention on the power source and make sure the voltage used is the same as the one required;
Disconnect from the power supply when installing, repairing or moving the product.
Check the ground is in place before you use the 110-220V AC.
Yellow – green wire is Ground
Keep the working fixture from shaking.
Please check the packing and confirm if there is any damage caused by shipping.
Technical Data
1) High brightness LED, digital DMX address display, easy operation
2) Voltage input: AC 100-240V/50-60HZ
3) Power: 30w
4) Lamp Type: LED（Φ5 super high brightness）
5) LED Specification: Red led (128PCS*Φ5); Green led (128PCS*Φ5); Blue led (128PCS*Φ5)
6) LED Arrangement: 8 groups RGB, every group consists of 32R、24G、24B; 24 segments ( 8 group x 3); every segment can be dimmed separately 0-100%.
7) Life time: 50 000 – 100 000 hours.
Power Contradict: 1.5kv
9) Resistance: ＞２MΩ
10) DMX 512 signal
11) Control Mode: DMX mode, Master / Slave mode, Sound Control, Auto Running
12) Channels: 3CH、4CH、7CH、10CH、16CH、24CH、28CH optional
13) Beam Angel: 25degree
14) Size: 96.5*6.5*8CM
15) Net Weight: 2.6kg
Display Operation
Addr: DMX mode
1. Press MENU to exit from previous mode; UP/DOWN continuously until “Addr” appears.
2. Press ENTER, “A001-A512” appears and glitters. Press “UP/DOWN” to choose the address;
3. Press ENTER again to confirm, setting will be saved automatically; If signal connecting is successful, “DMX” screen will glitter.
CHnd: choose DMX Channel
1. Press MENU exit from the previous mode; press “UP/DOWN” until “CHnd” appears.
2. Press ENTER, “3CH-28CH” appears and glitters. Press “UP/DOWN” to choose channel mode.
3. Press ENTER lasting for 2 Seconds, automatically return to “A001” DMX mode, setting will be saved. When it glitters for 4 seconds, it will also automatically return to “A001” DMX mode and save the setting if you do not press any key.
SLAV: slaver mode
1. Press MENU exit from the previous mode; press “UP/DOWN” until “SLAV” appears.
2. Press ENTER, “SLAV” appears and glitters. ENTER to confirm; setting saved and glitter stops. The slaver indicator lights.
SHnd:Mode of Program Installed inside
1. Press MENU to exit from the previous mode, ress UP/DPWN continuously until “SHnd” appears.
2. Press ENTER if “FADE” appears, it is “gradual changing” mode; if “SH 1 – SH 8” appears, it is the mode of 8 programs installed. Press “UP/DOWN” to choose the program you want.
3. Press ENTER once gain, “SP 1- SP 8” appears. If you want to change the speed of the current program, please use “UP/DOWN”.
4. Press ENTER the third time to return the current mode. Glitter stops and setting is saved. Master indicator lights.
AUTO: Automatic Running
1. Press MENU to exit from the previous mode; continuouse “UP/DOWN” until “AUTO” appears.
2. Press ENTER, “AUTO” appears and glitters; Press ENTER to confirm, setting saved and glitter stops. Master indicator lights.
Soun: Sound Control Mode
a) Press MENU to exit from the previous mode; continuouse “UP/DOWN” until “Soun” appears.
b) Press ENTER, “So 1 – So 8” appears and glitters; it is optional to press “Up/DOWN” to choose the mode of 8 program. Master indicator lights when you do that.
c) ENTER once again to confirm, setting saved and glitter stops. If there is any sound for the time being, the SOUND indicator lights.
COLO: COLOR OPTION
1. Press MENU to exit from the previous mode; press “UP/DOWN” continuously until “COLO” appears
2. Press ENTER, if “nanu” appears, it is the RGB mode of manual dimmer; press ENTER again to adjust the brightness of “r000“、“g000”、“b000”. When you return “nanu”, setting saved and glitter stops. If “Co 1-Co 8” appears, it means the 8 colors installed inside, press “UP/DOWN” to choose. Press ENTER again, setting saved and glitter stops.
bLnd: BLIND
1. MENU to exit from the previous mode; press “UP/DOWN” continuously until “bLnd” appears.
2. Press ENTER, ON or OFF appears and glitters, choose by “UP/DOWN”
3. ENTER once again, setting saved and glitter stops. ( ATT: when “ON” is set, it is the mode of blind, LED black out. )
Master and Slave Mode
Master: It means master mode as the master indicator lights. Master fixture will output signal to control slave fixtures. Only one of the fixtures in the line can be set as the rest will be slaves. Slave: it means slave mode as the slave indicator lights. All the slaves can accept the output signal from master fixture.
You can connect 15 pcs maximum in 110v operation.
DMX Channels
3CH
DMX CH Value Function
1CH 0—255 Red dimmer 0—100%
2CH 0—255 Green dimmer 0—100%
3CH 0—255 Blue dimmer 0—100%
4CH
DMX CH Value Funtion
1CH 0—255 Red dimmer 0—100%
2CH 0—255 Green dimmer 0—100%
3CH 0—255 Blue dimmer 0—100%
4CH 0—255 Macro control
7CH
DMX CH Value Function Priority
1CH 0—255 Red dimmer 0—100% 0
2CH 0—255 Green dimmer 0—100% 0
3CH 0—255 Blue dimmer 0—100% 0
4CH 0—26 invalid
3
27-53 Pattern 1
54-80 Pattern 2
81-107 Pattern 3
108-134 Pattern 4
135-161 Pattern 5
162-188 Pattern 6
189-215 Pattern 7
216-242 Pattern 8
243-255 Mixing 1-8
5CH 0—255 Pattern Speed，255 the fastest 1
6CH 0—15 Invalid
1
16-255 Strobe，255 the fastest
7CH 0—15 Invalid
2
16-242 Gradual Changing，242 the fastest
243-255 Sound Control Random
10CH：
2 segments. Every division consits of RGB ( 3 CH applied ). That means the first 6 Channels work separately on the RGB brightness of two divisions 0-100%. The rest 4 Channels control the functions, same as the setting of 7 CH mode.
16CH：
4 segments. Every division consists RGB ( 3 Channels applied ). That means the first 12 Channels work separately on the RGB brightness of 4 divisions 0-100%. The rest 4 Channels control the functions, same as the setting of 7 CH mode.
24CH：
8 segments. Every division consists RGB ( 3 Channels applied ). That means control separately on the RGB brightness of 8 divisions 0-100%.。
28CH：8 segments. Every division consists RGB ( 3 Channels applied ). That means the first 24 Channels work separately on the RGB brightness of 8 divisions 0-100%. The rest 4 Channels control the functions, same as the setting of 7 CH mode.
Conversion
between XLR 3-pin and XLR 5-pin
Look at the following drawing as reference ( standard 3-pin and 5-pin converting)
DMX512 XLR cabling：
Pin 1=screen
Pin 2= signal-
Pin 3= signal+
