Author Topic: Bill's Zipper is on sale.  (Read 21407 times)

BillESC

  • Preferred Vendor
  • Padawan
  • ***
  • Location: Kilmarnock, VA
  • Posts: 85
  • President of Entertainment Systems Corporation
    • Entertainment Systems Corporation
Bill's Zipper is on sale.
« on: April 12, 2010, 01:05:24 AM »
The Zipper is our own new LED strip fixture, made for us in Asia to our specifications.

Great as a wash fixture and lots of "Eye Candy."

38" long
384 diodes
Up to 28 DMX channels
Featuring a more robust chasis than ADJ's Mega Pixel or Chauvet's Colorstrip.



$ 179.00 delivered to the lower 48 states.
Thanks,

Bill ESC

Entertainment Systems Corporation
Innovative production services since 1973
800-582-2421
bill@entsyscorp.com

RoadRanger

  • SysGod
  • Counselor
  • Master
  • *****
  • Location: NE CT USA
  • Posts: 1781
  • "Wherever you go, There you are"
    • Cacophony Forums
Re: Bill's Zipper is on sale.
« Reply #1 on: April 12, 2010, 04:19:39 PM »
Those look pretty nice!

Do you have them on your website anywhere? How about a downloadable manual?

One band I BE for has no lights - How do you think a pair of these in "auto" mode mounted vertically on the speaker poles would work out without any other lighting?

BillESC

  • Preferred Vendor
  • Padawan
  • ***
  • Location: Kilmarnock, VA
  • Posts: 85
  • President of Entertainment Systems Corporation
    • Entertainment Systems Corporation
Re: Bill's Zipper is on sale.
« Reply #2 on: April 12, 2010, 05:23:48 PM »
Not on my web site yet but will be soon.  I have a manual in Word Doc that I can email or fax.

Two will do a nice job and be even better with a DMX controller.
Thanks,

Bill ESC

Entertainment Systems Corporation
Innovative production services since 1973
800-582-2421
bill@entsyscorp.com

monthlymixcd

  • Charter Member
  • Padawan
  • ***
  • Location:
  • Posts: 59
  • Rink Rash is Sexy. Support Your Local Roller Girls
Re: Bill's Zipper is on sale.
« Reply #3 on: April 12, 2010, 06:03:08 PM »
I'd like a copy of the manual, Bill when you get time. These may be a better fit for our band than the more expensive 420x fixtures we're looking at for work. (Lighting the RR bridges.)

Slightly OT... apologies for the hijack.

Also for Bill... Do you have any outdoor rated fixtures that would be suitable for outlining our bridges in LEDs? The 420x fixtures you sent us on loan are amazing... but now it's gotten the powers that be all fired up about detailing some of our more interesting trussed railroad bridges in LEDs... ala our Centennial Bridge, albeit on a smaller scale:



Thanks,
Roy
« Last Edit: April 12, 2010, 06:18:24 PM by monthlymixcd »

RoadRanger

  • SysGod
  • Counselor
  • Master
  • *****
  • Location: NE CT USA
  • Posts: 1781
  • "Wherever you go, There you are"
    • Cacophony Forums
Re: Bill's Zipper is on sale.
« Reply #4 on: April 12, 2010, 06:45:39 PM »
I have a manual in Word Doc that I can email or fax.
Hey why don't you post it here as an attachment so everybody can see it :)?

BillESC

  • Preferred Vendor
  • Padawan
  • ***
  • Location: Kilmarnock, VA
  • Posts: 85
  • President of Entertainment Systems Corporation
    • Entertainment Systems Corporation
Re: Bill's Zipper is on sale.
« Reply #5 on: April 12, 2010, 07:23:56 PM »
Don't know if this will work or not...

ENTERTAINMENT SYSTEMS

PIXEL LED WASH LIGHT

THE ZIPPER

User Manual

ONE
Thank you for choosing our products. Please read this manual carefully and keep it in a safe place for future reference.
The ZIPPER light source is super high brightness LED, multi colorful and long life time. Three-band color can dimmed separately.
This product is designed and made strictly according to CE rules, in full accordance with the standard of DMX 512 Agreement. It is suited for large events, theater, show, DJ, retail, club and hotel applications.

Safety Instructions
Pay special attention on the power source and make sure the voltage used is the same as the one required;
Disconnect from the power supply when installing, repairing or moving the product.
Check the ground is in place before you use the 110-220V AC.
Yellow – green wire is Ground
Keep the working fixture from shaking.
Please check the packing and confirm if there is any damage caused by shipping.

Technical Data
1)   High brightness LED, digital DMX address display, easy operation
2)   Voltage input: AC 100-240V/50-60HZ
3)   Power: 30w
4)   Lamp Type: LED(Φ5 super high brightness)     
5)   LED Specification: Red led (128PCS*Φ5); Green led (128PCS*Φ5); Blue led (128PCS*Φ5)
6)   LED Arrangement: 8 groups RGB, every group consists of 32R、24G、24B; 24 segments ( 8 group x 3); every segment can be dimmed separately 0-100%.
7)   Life time: 50 000 – 100 000 hours.
8)   Power Contradict: 1.5kv
9)   Resistance: >2MΩ
10)   DMX 512 signal
11)   Control Mode: DMX mode, Master / Slave mode, Sound Control, Auto Running
12)   Channels: 3CH、4CH、7CH、10CH、16CH、24CH、28CH optional
13)   Beam Angel: 25degree
14)   Size: 96.5*6.5*8CM
15)   Net Weight: 2.6kg
 
Display Operation
                     







                           
                      Addr: DMX mode
1.   Press MENU to exit from previous mode; UP/DOWN continuously until “Addr” appears.
2.   Press ENTER, “A001-A512” appears and glitters. Press “UP/DOWN” to choose the address;
3.   Press ENTER again to confirm, setting will be saved automatically; If signal connecting is successful, “DMX” screen will glitter.
CHnd: choose DMX Channel
1.   Press MENU exit from the previous mode; press “UP/DOWN” until “CHnd” appears.
2.   Press ENTER, “3CH-28CH” appears and glitters. Press “UP/DOWN” to choose channel mode.
3.   Press ENTER lasting for 2 Seconds, automatically return to “A001” DMX mode, setting will be saved. When it glitters for 4 seconds, it will also automatically return to “A001” DMX mode and save the setting if you do not press any key.
SLAV: slaver mode
1.   Press MENU exit from the previous mode; press “UP/DOWN” until “SLAV” appears.
2.   Press ENTER, “SLAV” appears and glitters. ENTER to confirm; setting saved and glitter stops. The slaver indicator lights.
SHnd:Mode of Program Installed inside
1.   Press MENU to exit from the previous mode, ress UP/DPWN continuously until “SHnd” appears.
2.   Press ENTER if “FADE” appears, it is “gradual changing” mode; if “SH 1 – SH 8” appears, it is the mode of 8 programs installed. Press “UP/DOWN” to choose the program you want.
3.   Press ENTER once gain, “SP 1- SP 8” appears. If you want to change the speed of the current program, please use “UP/DOWN”.
4.   Press ENTER the third time to return the current mode. Glitter stops and setting is saved. Master indicator lights.
AUTO: Automatic Running
1.   Press MENU to exit from the previous mode; continuouse “UP/DOWN” until “AUTO” appears.
2.   Press ENTER, “AUTO” appears and glitters; Press ENTER to confirm, setting saved and glitter stops. Master indicator lights.
Soun: Sound Control Mode
a)   Press MENU to exit from the previous mode; continuouse “UP/DOWN” until “Soun” appears.
b)   Press ENTER, “So 1 – So 8” appears and glitters; it is optional to press “Up/DOWN” to choose the mode of 8 program. Master indicator lights when you do that.
c)   ENTER once again to confirm, setting saved and glitter stops. If there is any sound for the time being, the SOUND indicator lights.
COLO: COLOR OPTION
1.   Press MENU to exit from the previous mode; press “UP/DOWN” continuously until “COLO” appears
2.   Press ENTER, if “nanu” appears, it is the RGB mode of manual dimmer; press ENTER again to adjust the brightness of “r000“、“g000”、“b000”. When you return “nanu”, setting saved and glitter stops. If “Co 1-Co 8” appears, it means the 8 colors installed inside, press “UP/DOWN” to choose. Press ENTER again, setting saved and glitter stops.
bLnd: BLIND
1. MENU to exit from the previous mode; press “UP/DOWN” continuously until “bLnd” appears.
2. Press ENTER, ON or OFF appears and glitters, choose by “UP/DOWN”
3. ENTER once again, setting saved and glitter stops. ( ATT: when “ON” is set, it is the mode of blind, LED black out. )

Master and Slave Mode
Master: It means master mode as the master indicator lights. Master fixture will output signal to control slave fixtures. Only one of the fixtures in the line can be set as the rest will be slaves.  Slave: it means slave mode as the slave indicator lights. All the slaves can accept the output signal from master fixture.
You can connect 15 pcs maximum in 110v operation.

DMX Channels
3CH
DMX CH   Value   Function
1CH   0—255   Red dimmer 0—100%
2CH   0—255   Green dimmer 0—100%
3CH   0—255   Blue dimmer 0—100%

4CH
DMX CH   Value   Funtion
1CH   0—255   Red dimmer 0—100%
2CH   0—255   Green dimmer 0—100%
3CH   0—255   Blue dimmer 0—100%
4CH   0—255   Macro control

7CH
DMX CH   Value   Function   Priority
1CH   0—255   Red dimmer 0—100%    0
2CH   0—255   Green dimmer 0—100%    0
3CH   0—255   Blue dimmer 0—100%    0



4CH   0—26   invalid   





3
   27-53   Pattern 1   
   54-80   Pattern 2   
   81-107   Pattern 3   
   108-134   Pattern 4   
   135-161   Pattern 5   
   162-188   Pattern 6   
   189-215   Pattern 7   
   216-242   Pattern 8   
   243-255   Mixing 1-8   
5CH   0—255   Pattern Speed,255 the fastest   1

6CH   0—15   Invalid   
1
   16-255   Strobe,255 the fastest   

7CH   0—15   Invalid   
2
   16-242   Gradual Changing,242 the fastest   
   243-255   Sound Control Random   
10CH:

2 segments. Every division consits of RGB ( 3 CH applied ). That means the first 6 Channels work separately on the RGB brightness of two divisions 0-100%. The rest 4 Channels control the functions, same as the setting of 7 CH mode.

16CH:

4 segments. Every division consists RGB ( 3 Channels applied ). That means the first 12 Channels work separately on the RGB brightness of 4 divisions 0-100%. The rest 4 Channels control the functions, same as the setting of 7 CH mode.
24CH:

8 segments. Every division consists RGB ( 3 Channels applied ). That means control separately on the RGB brightness of 8 divisions 0-100%.。
28CH:8 segments. Every division consists RGB ( 3 Channels applied ). That means the first 24 Channels work separately on the RGB brightness of 8 divisions 0-100%. The rest 4 Channels control the functions, same as the setting of 7 CH mode.




       Conversion
between XLR 3-pin and XLR 5-pin

Look at the following drawing as reference ( standard 3-pin and 5-pin converting)


 

DMX512 XLR cabling:
Pin 1=screen             
Pin 2= signal-               
Pin 3= signal+




Thanks,

Bill ESC

Entertainment Systems Corporation
Innovative production services since 1973
800-582-2421
bill@entsyscorp.com

RoadRanger

  • SysGod
  • Counselor
  • Master
  • *****
  • Location: NE CT USA
  • Posts: 1781
  • "Wherever you go, There you are"
    • Cacophony Forums
Re: Bill's Zipper is on sale.
« Reply #6 on: April 12, 2010, 07:29:35 PM »
Not quite what I had in mind but it worked :). Below the posting window is "Additional Options" and if you expand it you can "attach" a file like that .doc file you say you have.

monthlymixcd

  • Charter Member
  • Padawan
  • ***
  • Location:
  • Posts: 59
  • Rink Rash is Sexy. Support Your Local Roller Girls
Re: Bill's Zipper is on sale.
« Reply #7 on: April 12, 2010, 08:04:47 PM »
That works for me... thanks!

BigJD

  • Charter Member
  • Youngling
  • **
  • Location:
  • Posts: 22
Re: Bill's Zipper is on sale.
« Reply #8 on: April 12, 2010, 10:12:04 PM »
Bill I'd like to see a vid with one of these in action.

RoadRanger

  • SysGod
  • Counselor
  • Master
  • *****
  • Location: NE CT USA
  • Posts: 1781
  • "Wherever you go, There you are"
    • Cacophony Forums
Re: Bill's Zipper is on sale.
« Reply #9 on: April 12, 2010, 10:21:32 PM »
Chavet has a video of their similar colorstrip:
http://www.chauvetlighting.com/colorstrip.html
Also some videos of the colorstrip on YouTube.

BillESC

  • Preferred Vendor
  • Padawan
  • ***
  • Location: Kilmarnock, VA
  • Posts: 85
  • President of Entertainment Systems Corporation
    • Entertainment Systems Corporation
Re: Bill's Zipper is on sale.
« Reply #10 on: April 13, 2010, 12:12:47 AM »
Ranger is correct.  Both Chauvet's Colorstrip and ADJ's Mega Pixel LED have videos.  This is the same fixture with a slightly more robust chasis.
Thanks,

Bill ESC

Entertainment Systems Corporation
Innovative production services since 1973
800-582-2421
bill@entsyscorp.com

BigJD

  • Charter Member
  • Youngling
  • **
  • Location:
  • Posts: 22
Re: Bill's Zipper is on sale.
« Reply #11 on: April 13, 2010, 02:01:39 AM »
Well I have a couple of the colorstrips. Are they really a pretty close imitation?

BillESC

  • Preferred Vendor
  • Padawan
  • ***
  • Location: Kilmarnock, VA
  • Posts: 85
  • President of Entertainment Systems Corporation
    • Entertainment Systems Corporation
Re: Bill's Zipper is on sale.
« Reply #12 on: April 13, 2010, 02:24:06 AM »
Same number of LED's, same configuration, same functionality and same size.  Just a lower price.
Thanks,

Bill ESC

Entertainment Systems Corporation
Innovative production services since 1973
800-582-2421
bill@entsyscorp.com

BigJD

  • Charter Member
  • Youngling
  • **
  • Location:
  • Posts: 22
Re: Bill's Zipper is on sale.
« Reply #13 on: April 13, 2010, 02:31:01 AM »
Good deal for the price then makes the Zipper very a killer deal. :thu:

BillESC

  • Preferred Vendor
  • Padawan
  • ***
  • Location: Kilmarnock, VA
  • Posts: 85
  • President of Entertainment Systems Corporation
    • Entertainment Systems Corporation
Re: Bill's Zipper is on sale.
« Reply #14 on: April 14, 2010, 03:55:08 AM »
Thanks DJ. 

My ultimate goal is an Architainment line of diode based luminaries for the industrial, commerical and high end residential markets, but I'm probably too old to get there..   :facepalm:

The Zipper is the first fixture I directly imported.  It's been in the field over a year and I've yet to receive a warranty issue.  The next fixture I brought in to test is our 420B series, which features 60 one watt diodes in a RGBAW pixel pattern.  Here's a pic.



Here's what one can do, only 12 watts used.



Here's what two can do, again only 12 watts per side running (fixtures about 70 feet apart.)



This shows the location of one of the fixtures.



It's really starting to get exciting.
« Last Edit: April 14, 2010, 03:58:05 AM by BillESC »
Thanks,

Bill ESC

Entertainment Systems Corporation
Innovative production services since 1973
800-582-2421
bill@entsyscorp.com