91
DL1608/DL806/DL32R/ProDX Mixers / issue with dl16s
« Last post by davidbrac on April 26, 2022, 09:45:24 PM »New to digital mixers and finding my way with a dl16s.
Tonight at rehearsal, channel 1 which had a shure radio mic connected stopped responding. If I tapped the mic l could here that but the vocal was not there. Finally I reset the amp and it started to work again.
I think this happened after some feedback when trying to set the gain and trim, Is there some sort of protection device on each channel that cuts out, if so what is the procedure for resetting it?
If not what else could have caused this?
Thanks
David
Tonight at rehearsal, channel 1 which had a shure radio mic connected stopped responding. If I tapped the mic l could here that but the vocal was not there. Finally I reset the amp and it started to work again.
I think this happened after some feedback when trying to set the gain and trim, Is there some sort of protection device on each channel that cuts out, if so what is the procedure for resetting it?
If not what else could have caused this?
Thanks
David