Furman Power Conditioner + Mackie DL series ?

[Loic.J]

Hello,

(First excuse my English.)
My DL32R is connected to a "Furman PL-Pro DMC-E" in a rack and I would like to know if I can let the power switch button (of the Mackie) on the "ON" position.
Some of my friends say "No, it's not recommended", the others tell me yes and I can use the Furman's Power switch button to supply the rack.

Thank you for your help!

Loïc

[dpdan]

I use a similar Furman power unit and I never use the power switch on the rear of the DL32R,
it gets power along with all the other gear in that rack when I turn on the Furman's front power switch.

 

[Loic.J]

Thank you ! 

[dpdan]

glad to help,
when I am finished with the job, I create another snapshot and name it,
then power down the amps and powered monitors and the DL32R rack.
No problems have ever been encountered using this proceedure.

[Michael Welter]

Same here. I have a Furman power sequencer in the rack with the DL32R, and I've never user the power switch on the DL32R. I always power it on and off with the Furman. No issues so far.

[takis]

Same with me... when I hit the red button on the furman it turns on everythign in my rack including my amps....  neer had a problem....

[Jkowtko]

My only issue is that the wifi router needs to be completely up and running before I power on my DL1608, or else it won't register itself properly with the router.  (the DL is hardwired to the router).

[sam.spoons]

Yup, same here. Anyway it's good practice to power dow your amps before the mixer (and the reverse on power on) to avoid tweeter destroying spikes.

[RoadRanger]

My only issue is that the wifi router needs to be completely up and running before I power on my DL1608, or else it won't register itself properly with the router.  (the DL is hardwired to the router).

You can "fix" that by going to static IP's - works great for me .