WTF! 3.0 lags so hard it's barely usable!

[Wynnd]

I'm going to spend some time trying to find a reverb setting that is useful.  Found a delay setting that I like.  Will get back with any worthwhile results.

[Topsøe]

I have been running AltiSpace off the 30pin connector on my old iPhone 4 , routing send 6 to USB 1+2 ( could also have used the reverb send but i use it for snare ) and return on the iPad channel , sounds pretty amasing
It also works on my DL32r via camera connector kit but only on lightning equiped iPone/iPad's and takes up the USB connector so that i can't record (at the same time)

[RoadRanger]

I have been running AltiSpace off the 30pin connector on my old iPhone 4 , routing send 6 to USB 1+2 ( could also have used the reverb send but i use it for snare ) and return on the iPad channel , sounds pretty amazing.

Dunno if Mackie reads this thread - but I suggest they don't try this is it will majorly bum them out compared to their "meh" 'verbs .

[Topsøe]

but whats the point hauling a 12 kg M5000 when the mixer is 4.5 kg and you can get a good convolution for 10$ and run it from an old phone 😃

[Rdmitch]

if you find a good setting internal to the DL perhaps we can share via Dropbox.
or I guess we could take a screenshot picture and post it then others can  copy the
settings.
I would prefer to use what is available and not deal with external devices. The idea with the
DL was to reduce wiring and outboard gear.

[Rdmitch]

I uploaded the newer version to an ipad3 which is where I had the most problems, I did not load it into the mixer yet but had a chance to play a bit with the app.  I do see a improvement in the PEQ and would say it's more than slightly better. Actually, it seems a lot more responsive and I'm quite pleased with what I see. Over the weekend I will get a chance to mess a bit more with it using it as a remote only. if it works equally as well when connected to the mixer I would be a happy camper......or at least until I find something else to whine about.

[robbocurry]

I have been running AltiSpace off the 30pin connector on my old iPhone 4 , routing send 6 to USB 1+2 ( could also have used the reverb send but i use it for snare ) and return on the iPad channel , sounds pretty amasing
It also works on my DL32r via camera connector kit but only on lightning equiped iPone/iPad's and takes up the USB connector so that i can't record (at the same time)

Can you run that by me again? You're doing this on a DL1608 how? Wow!

[RoadRanger]

Can you run that by me again? You're doing this on a DL1608 how? Wow!

http://cacophony.aspinock.com/index.php?topic=810.0
I'll put that in the FAQ .

[gerenm63]

I'm going to spend some time trying to find a reverb setting that is useful.  Found a delay setting that I like.  Will get back with any worthwhile results.

That's the spirit! I spent a half hour or so twiddling around with the reverb, and was able to come up with some very usable sounds. One of the bands I regularly do sound for has a female vocalist and they do a couple of Jefferson Airplane tunes. I've got a preset for her that about nails the classic sound from White Rabbit.

I've got a couple of other presets, too, that are very usable in club settings. Yes, it took a little bit of work, but I'd've done that with any digital reverb I bought, because out of the box, they all sound like garbage.

[Rdmitch]

Take a screen shot of the reverb page and post the pic. I can use some cool reverbs since mine pretty much suck

[walterw]

wow, hadn't realized there was an update (it's actually been a little while since i've used the mixer);

that parametric screen display is now freakishly fast on my 1st gen ipad air!

[robbocurry]

Can you run that by me again? You're doing this on a DL1608 how? Wow!

http://cacophony.aspinock.com/index.php?topic=810.0
I'll put that in the FAQ .

Thanks RR, will give that a go

[gerenm63]

Take a screen shot of the reverb page and post the pic. I can use some cool reverbs since mine pretty much suck

I will, next time I'm working on reverbs. Maybe a new sticky topic could be created to hold those screen shots....

[Topsøe]

I have been running AltiSpace off the 30pin connector on my old iPhone 4 , routing send 6 to USB 1+2 ( could also have used the reverb send but i use it for snare ) and return on the iPad channel , sounds pretty amasing
It also works on my DL32r via camera connector kit but only on lightning equiped iPone/iPad's and takes up the USB connector so that i can't record (at the same time)

Can you run that by me again? You're doing this on a DL1608 how? Wow!

[Topsøe]

I have been running AltiSpace off the 30pin connector on my old iPhone 4 , routing send 6 to USB 1+2 ( could also have used the reverb send but i use it for snare ) and return on the iPad channel , sounds pretty amasing
It also works on my DL32r via camera connector kit but only on lightning equiped iPone/iPad's and takes up the USB connector so that i can't record (at the same time)

Can you run that by me again? You're doing this on a DL1608 how? Wow!